5 x 108-127 Spacer 1/2" Thick (Pair)
| Thickness | 1/2" |
|---|---|
| Sold as | Pair (2 pieces) |
Fitment and specs
- Fits 5 lug bolt patterns from 4.25 inch (108mm) to 5 inch (127mm)
- Thickness: 1/2 inch
- Lightweight aluminum build
- Sold in pairs
Seat the spacer flat against a clean hub face, mount the wheel, and torque the lug nuts to your vehicle's spec with our torque reference chart as your guide. A 1/2 inch spacer takes a real bite out of thread length, so check that you still have the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Fit suitable longer studs (or longer lug bolts on cars that use them) if needed, confirm the wheel and spacer seat flush, and check that closed-end lug nuts do not bottom out. Re-torque after the first 50 to 100 miles.
Common questions
Is 5x108 the same as 5x4.25?
Yes. 5x4.25 is the inch name for the 5x108mm pattern, and 5x5 is the inch name for 5x127mm. Both ends of this spacer's range are the same sizes you may see listed in metric.
Do I need longer studs with a 1/2 inch spacer?
Possibly. Check the thread engagement with the spacer and wheel installed; if it is less than the vehicle, wheel and fastener manufacturers require, install suitable longer studs before driving on them.