5 x 4 1/2"-5" Wheel Spacer 1/4" Thick (Pair)
| Thickness | 1/4" |
|---|---|
| Sold as | Pair (2 pieces) |
Light aluminum build. They are 1/4" thick. Fit 5 lug with standard 4 1/2" - 5" bolt pattern. Please check the thickness of spacers and make sure your lugs and studs are long enough. Use the thread engagement required by the vehicle, wheel and fastener manufacturers. Re-torque after the first 50 to 100 miles and check torque periodically after that. Our application guide page will answer most of your application fitment questions but ask us about unanswered questions. Sold in pair.
Size:
Fitment and specs
- 1/4" thick with a lightweight aluminum build
- Fits 5 lug standard bolt patterns from 4 1/2" to 5"
- Covers 5x4.5 (5x114.3), 5x4.75 (5x120.65), and 5x5 (5x127)
- Sold as a pair
Install with the spacer sitting flush against a clean, rust-free hub face so the wheel still seats flat. Use the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Fit suitable longer studs if needed, confirm the wheel and spacer seat flush, and check that closed-end lug nuts do not bottom out. Then torque to your vehicle's spec using our torque reference chart. Re-torque after the first 50 to 100 miles of driving.
Common questions
Will 1/4" of spacing clear my brake calipers?
Measure first. A 1/4" spacer moves each wheel out exactly 1/4", so check the gap between the wheel and the point of contact. If you are short by more than that, you need a thicker spacer or a different wheel offset.
Do I lose stud engagement with a 1/4" spacer?
The spacer does take up 1/4" of thread length, which is why thread engagement matters. If the studs still give the thread engagement required by the vehicle, wheel and fastener manufacturers, engagement is solid; if not, fit suitable longer studs.