5 x 4 1/2"-5" Wheel Spacers 3/16" Thick (Pair)
| Thickness | 3/16" |
|---|---|
| Sold as | Pair (2 pieces) |
Light aluminum build. They are 3/16" thick. Fit 5 lug with standard 4 1/2" - 5" bolt pattern. Please check the thickness of spacers and make sure your lugs and studs are long enough. Use the thread engagement required by the vehicle, wheel and fastener manufacturers. Re-torque after the first 50 to 100 miles and check torque periodically after that. Our application guide page will answer most of your application fitment questions but ask us about unanswered questions. Sold in pair.
Size:
Fitment and specs
- 3/16" thick with a lightweight aluminum build
- Fits 5 lug standard bolt patterns from 4 1/2" to 5"
- Works across 5x114.3 (5x4.5), 5x120.65 (5x4.75), and 5x127 (5x5)
- Sold as a pair
Clean the hub face before installing so the spacer and wheel both sit dead flat. Use the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Fit suitable longer studs if needed, confirm the wheel and spacer seat flush, and check that closed-end lug nuts do not bottom out. Torque to your vehicle's spec per our torque reference chart, and re-torque after the first 50 to 100 miles.
Common questions
Should I buy the thinnest spacer that solves my problem?
Yes. A thinner spacer preserves more stud engagement, so if 3/16" clears the rub or interference you are dealing with, there is no benefit to going thicker.
Do these fit a 5x4.75 bolt pattern?
Yes. 4 3/4" sits inside the 4 1/2" to 5" range these are built for, so 5x4.75 (5x120.65) wheels and hubs are covered.