5x150 & 7x150 Spacer 1/4" Thick (Pair)
| Bolt pattern(s) | 5x150mm, 7x150mm |
|---|---|
| Thickness | 1/4" |
| Sold as | Pair (2 pieces) |
Light aluminum build. They are 1/4" thick. Fit Toyota Tundra 5 x 150 bolt pattern and Ford 7x150. Please check the thickness of spacers and make sure your lugs and studs on your are long enough. Use the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Re-torque after the first 50 to 100 miles. Our application guide page will answer most of your application fitment questions but ask us for unanswered question. Sold in pair.
Fitment and specs
- Fits 5x150 and 7x150 bolt patterns
- 1/4" thick for a small track-width gain
- Same pattern in and out, so current wheels bolt back on
- Sold as a pair
Since the pattern is the same on both faces, this spacer widens your stance slightly instead of converting to a different pattern. Mount it flat on a clean hub, torque to your vehicle's factory specification with help from the torque reference chart, and re-torque after the first 50 to 100 miles. Do not shorten wheel studs merely because they project through this slip-on spacer. Use wheel studs or lug bolts with the required thread and seat, long enough to maintain the thread engagement required by the vehicle, wheel and fastener manufacturers at the chosen spacer thickness; fit suitable longer hardware if needed. Confirm that the spacer and wheel seat flush, lug nuts do not bottom out, and fasteners do not contact other components.
Common questions
What does a 1/4" spacer actually do?
It moves each wheel outward by 1/4", which can fine-tune stance or add clearance for brakes and suspension without changing your bolt pattern.
How do I know it fits?
Match your bolt pattern to 5x150 or 7x150 and check your vehicle against the applications shown in the description above.