8 Lug 1/4" Thick Spacer 6.5", 170mm, 180mm (Pair)
| Thickness | 1/4" |
|---|---|
| Sold as | Pair (2 pieces) |
|
Light aluminum build. They are 1/4" thick. Fit 8 lug standard 6 1/2", 8x170 and 8x180 lug bolt pattern. Please check the thickness of spacers and make sure your lugs and studs are long enough. Use the thread engagement required by the vehicle, wheel and fastener manufacturers. Re-torque after the first 50 to 100 miles and check torque periodically after that. Our application guide page will answer most of your application fitment questions but ask us about unanswered questions. Sold in pair.
Size:
|
Fitment and specs
- Thickness: 1/4 inch
- Bolt patterns: 8 lug standard 6.5" (8x165.1), 8x170, and 8x180
- Material: lightweight aluminum
- Sold as a pair
Set the spacer flat against a clean, rust-free hub face, mount the wheel on your existing studs, and torque the lug nuts to your vehicle's spec using our torque reference chart. Use the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Fit suitable longer studs if needed, confirm the wheel and spacer seat flush, and check that closed-end lug nuts do not bottom out. Re-torque after the first 50 to 100 miles.
Common questions
Will a 1/4" spacer work with my stock studs?
Often yes, but check rather than assume: with the spacer and wheel installed, compare the thread engagement with what the vehicle, wheel and fastener manufacturers require. Anything short of that calls for suitable longer studs.
Does one pair cover 8x6.5, 8x170, and 8x180?
Yes. These are cut to fit all three 8 lug patterns, so one pair handles whichever your hubs use. Double-check your bolt pattern before ordering.