Black ET Spline Drive Tuner Lug Nuts 14x2.0

6-Spline tuner style black plated ET conical lug nuts 14mmx2.0 thread size with key. The hex key has both 3/4" and 13/16" head. 0.61" diameter. The lugs are heat treated to achieve extra strength. Our application guide page will answer most of your application fitment questions but do not hesitate to ask us.

Fitment and specs

• Thread size: 14x2.0 for 14 mm studs with a 2.0 mm thread pitch
• Black plated 6-spline ET tuner lug nuts with conical seat
• Heat treated for extra strength
• 0.61 inch diameter clears tight tuner wheel lug openings
• Spline key included; the key hex fits 3/4 inch and 13/16 inch sockets

Hand start each nut, then seat the included spline key into the drive and tighten with a standard socket in a star pattern. Set final torque to your vehicle's spec using our torque reference chart and re-torque after 50 to 100 miles.

Common questions

Do these replace mag or ball seat lug nuts?
No. Seat styles are not interchangeable. These use a conical seat, so your wheels need a matching tapered seat for the nuts to center and hold torque correctly.

Will an impact gun hurt the black finish?
Running them down at full power can mar the plating and overshoot torque. Snug them with the key at low speed or by hand, then finish with a torque wrench for a clean look and an accurate clamp.