ET Spline Drive Tuner Lug Nuts 14x2.0
6-Spline tuner style chrome plated ET conical lug nuts 14mmx2.0 thread size with key. The hex key has both 3/4" and 13/16" head. 0.75" diameter. The lugs are heat treated to achieve extra strength. Our application guide page will answer most of your application fitment questions but do not hesitate to ask us.
Fitment and specs
- Thread size: 14x2.0 (14 mm stud diameter, 2.0 mm thread pitch)
- 6-spline ET tuner style drive with conical seat
- Chrome plated, heat treated for extra strength
- 0.75 inch diameter fits small tuner wheel lug bores
- Includes a spline key with dual 3/4 inch and 13/16 inch hex head
Thread every nut on by hand first to protect the studs, then run them down with the included spline key on a standard socket. Torque in stages in a star pattern to the spec in our torque reference chart and re-torque after the first 50 to 100 miles.
Common questions
Can I use these on wheels built for mag seat lug nuts?
No. These have a conical seat, and conical, mag, and ball seat styles are not interchangeable. The seat on the nut has to match the seat machined into your wheel.
How do I confirm my vehicle uses a 14x2.0 thread?
Check the owner's manual or compare a current lug nut against a thread gauge. 14x2.0 means a 14 mm stud with a 2.0 mm pitch. If a nut resists after a turn or two by hand, the pitch is wrong, so stop rather than forcing it.