EZAccessory 1/2-20 Extended Tuner Lug Nuts 20 Pieces Racing Open End Style with Key

• SET - 20 Pieces Racing Tuner Lug Nuts + Key

• SPECS - 1/2"-20 Thread Pitch | Overall Length 2.0” (51mm) | 60 Degree Cone/Conical Seat | Hex 17mm | Open End | 1 Machined Socket Key

• FITMENT - Wheels with a 1/2"-20 thread pitch and 60 degree conical seat aftermarket rims

• SAFETY - Through hardened steel construction with a heat treated finish creates a heat-resistant, durable, anti-corrosion, and high-strength product. Strip-resistant machined threads for a secure fit on your wheel studs

• AFTERMARKET - These lug nuts are designed for aftermarket wheels. This part might match the thread pitch of your vehicle but in many cases the lug seat is not large enough to create enough clamping force to safely secure the factory wheel to your vehicle.

Fitment and specs

• Thread pitch: 1/2"-20
• 60 degree conical seat for aftermarket wheels
• Open end tuner style, 2.0" (51mm) overall length
• 17mm hex, with one machined socket key in the set
• Through hardened steel with a heat treated, anti-corrosion finish
• Set of 20 lug nuts plus the key

Start each nut by hand to avoid cross-threading, snug the wheel down in a crossing pattern, then tighten to the spec in our torque reference chart. Re-torque after 50 to 100 miles, which matters most on freshly mounted aftermarket wheels.

Common questions

How do I know these fit my wheels?
You need two matches: studs with a 1/2"-20 thread pitch and wheels machined for a 60 degree conical seat. Seat styles are not interchangeable, so if your wheels use a mag or ball seat these are the wrong nut regardless of thread.

Can I use them on my factory wheels?
They are designed for aftermarket rims. Even when the thread pitch matches your vehicle, the seat on a factory wheel is often not large enough for the nut to create the clamping force needed to hold the wheel safely, so keep these on aftermarket wheels with 60 degree conical seats.