Hub Centric Ring O.D. 100mm I.D. 93.1mm Newer Bronco Ranger

One set of 4 hub centric rings with O.D. (outer diameter) of 100mm and I.D. (inner diameter) of 93.1mm. These rings are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks

• Fits Ford Bronco (21-on), Ranger (19-on) hub of 93.1mm bore with wheels having 100mm bore

Size:

Fitment and specs

• Outer diameter: 100mm, for wheels with a 100mm center bore
• Inner diameter: 93.1mm, matches the 93.1mm hub bore
• Set of 4, one ring per wheel
• High quality poly carbon construction
• Fits Ford Bronco (2021-on) and Ranger (2019-on)

Clean the hub pilot, then press a ring into the center bore on the back of each wheel until it seats flush. Hand pressure does it, no adhesive required. The ring fills the space between the truck's 93.1mm hub and the wheel's 100mm bore so the wheel mounts precisely centered and runs smooth.

Common questions

Will the rings stay put on rough roads and trails?
Yes. Once the wheel is mounted, the ring is held captive between the wheel and the hub, so it stays seated while you drive. Just confirm each ring is still in place any time you pull a wheel.

My wheels have a 100mm bore. Is that all I need to check?
Match both numbers. You want a 100mm wheel center bore and the 93.1mm hub found on the Bronco from 2021 on and the Ranger from 2019 on.