Hub Centric Ring O.D. 110mm I.D. 106mm Toyota

One set of 4 hub centric rings with O.D. (outer diameter) of 110mm and I.D. (inner diameter) of 106mm. These rings are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks

• Toyota: 6 lug Tacoma, 6 lug Tundra, 6 lug 4-Runner, 6 lug Pickup, etc.

Size:

Fitment and specs

• Outer diameter: 110mm, for wheels with a 110mm center bore
• Inner diameter: 106mm, matching the Toyota 6 lug truck hub
• Set of 4 rings, one for each wheel
• High quality poly carbon construction
• Applications include 6 lug Toyota Tacoma, Tundra, 4-Runner, and Pickup

Press each ring into the back of the wheel's center bore until flush, then mount the wheel. With the 106mm hub filling the ring, the wheel drops on centered instead of hanging off center on the studs while you line it up. Installation is a simple hand press with no tools needed.

Common questions

Why is the wall on these rings fairly thin?
Because the sizes are close. The ring only needs to span the difference between a 106mm hub and a 110mm wheel bore, so a thin, precisely molded wall is exactly right for this combination.

My Tacoma is a 6 lug. Are these the right rings?
They fit the 6 lug Tacoma along with the 6 lug Tundra, 4-Runner, and Pickup, which run the 106mm hub. Pair them with wheels that have a 110mm center bore and you have the correct match.