Hub Centric Ring O.D. 125mm I.D. 116mm

One set of 4 hub centric rings with O.D. (outer diameter) of 125mm and I.D. (inner diameter) of 116mm. These rings are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks

• Fits hub of 116mm bore with wheels having 125mm bore

Size:

Fitment and specs

• Outer diameter (O.D.): 125mm, matches wheels with a 125mm center bore
• Inner diameter (I.D.): 116mm, matches a 116mm vehicle hub
• Material: high quality poly carbon
• Set of 4 rings, one for each wheel

Clean the hub pilot and the back of the wheel's center bore before you start. Press each ring into the wheel's bore by hand until it sits flush, then hang the wheel and tighten your hardware as usual. The ring fills the gap so the wheel finds dead center on the hub.

Common questions

Do hub centric rings stay with the wheel or the car?
They seat into the wheel's center bore, so they come off with the wheel. Give each ring a quick look whenever the wheels are off and re-seat any that have shifted.

What difference do these rings make?
They take up the space between the 116mm hub and the 125mm wheel bore so the wheel sits precisely centered. A centered wheel mounts easier and rolls smoother.