Hub Centric Ring O.D. 67mm I.D. 57.1mm

One set of 4 hub centric rings with O.D. (outer diameter) of 67mm and I.D. (inner diameter) of 57.1Mm. These rings are made of high quality polycarbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks

• Fits hub of 57.1mm bore with wheels having 67mm bore

Size:

Fitment and specs

• Outer diameter (O.D.): 67mm, fits wheels with a 67mm center bore
• Inner diameter (I.D.): 57.1mm, fits a vehicle hub measuring 57.1mm
• Set of 4, one ring per wheel
• High quality polycarbon construction

Set each ring into the center bore on the back of the wheel and press until it sits flush against the wheel. It bridges the 57.1mm hub and the 67mm bore so the wheel slides onto the hub already centered, which makes lining up the lug holes noticeably easier. The fit is snug by design; no adhesive is needed.

Common questions

Do the rings stay in place when I rotate my tires?
Yes. They stay seated in the wheel's center bore, so they travel with the wheel from corner to corner and there is nothing extra to do during a rotation. Just confirm each ring is still seated before the wheel goes back on.

Are these reusable if I change wheels later?
The rings can be moved to another set of wheels as long as they are in good condition and the new wheels also have a 67mm center bore over the same 57.1mm hub. Different bore or hub sizes call for a different ring size.