Hub Centric Ring O.D. 67mm I.D. 60.06mm
|
One set of 4 hub centric rings with O.D. (outer diameter) of 67mm and I.D. (inner diameter) of 60.06mm. These rings are made of high quality polycarbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks
Size: 
|
Fitment and specs
- Outer diameter (O.D.): 67mm, matches the wheel center bore
- Inner diameter (I.D.): 60.06mm, matches the vehicle hub
- Sold as a set of 4 rings, one for each wheel
- Made of high quality polycarbon
- Adapts aftermarket wheels with a 67mm bore to a 60.06mm hub
Wipe the hub face and the back of the wheel bore clean, then press a ring into the center bore on the back of each wheel until it sits flush. Mount the wheel as usual; the ring keeps it precisely centered on the hub while you tighten everything down. A firm hand press is normally all it takes, no tools or adhesive needed.
Common questions
How do I confirm this is the right size for my setup?
Measure two numbers: the center bore of your aftermarket wheel, which should be 67mm (your wheel dealer can confirm), and the diameter of your vehicle hub, which should be 60.06mm. If both match, this is the correct ring.
What difference do hub centric rings make?
They fill the space between the hub and the wheel bore so the wheel sits centered exactly on the axle centerline. A precisely centered wheel balances true and gives a smoother ride, especially at highway speed.