Hub Centric Ring O.D. 87mm I.D. 60.06mm Lexus Toyota Suzuki
One set of 4 hub centric rings with O.D. (outer diameter) of 87.0mm and I.D. (inner diameter) of 60.06mm. These rings are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks
-
Lexus: LS430, IS300, ES300, GS300, GS400, LS400, LS400, SC300, SC400, SC430 (18" only) RX300
-
Suzuki: Swift
-
Toyota: Avalon, Camary Solara, Camary 92-on, MR-2 90-95, MR-2 Turbo, Highlander (16"), Tocama 2WD, RAV-4, Previa
Size:
Fitment and specs
- Outer diameter 87mm sized to the wheel center bore
- Inner diameter 60.06mm to fit over the hub
- Applications include Lexus, Toyota, and Suzuki as shown above
- Brings an 87mm wheel bore true to a 60.06mm hub
Set the ring over the hub first, then hang the wheel so it rests centered against it. Nothing is glued or torqued into the ring; installing the wheel captures it in position.
Common questions
Why use a hub centric ring?
When a wheel bore is wider than the hub, the ring closes that space so the wheel rides dead-center on the hub, giving a smoother, balanced feel.
How do I confirm the size is right?
Your wheel's center bore should measure 87mm and your hub 60.06mm. If both line up with this ring, it is the correct match.