Hub Centric Wheel Adapter 5 Lug Toyota Tundra (Pair)

These hub centric adapters are used for 5 lug 150mm bolt pattern with 110mm hub to fit factory wheels (110mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 14x1.5 thread size pre-installed wheel studs are included.

• Toyota: Tundra 5 Lug (07-on)
  
  

Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).

**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.

Fitment and specs

• Bolt pattern: 5x150mm, vehicle side and wheel side
• Hub centric with a 110mm bore, matched to Toyota factory wheels
• Fits Toyota Tundra 5 lug, 2007 and newer
• CNC machined 6061 T6 billet aluminum
• 14x1.5 thread wheel studs pre-installed, open end lug nuts included
• Sold as a pair, with free US shipping

These bolt to your Tundra's 5x150mm hubs, and because the wheel side carries the same pattern they work as spacers, adding track width while keeping your factory wheels. Torque the adapter nuts and lug nuts to spec using our torque reference chart, then re-torque after 50 to 100 miles. If the factory hub studs protrude past the adapter face, shorten them so the wheel sits flush.

Common questions

Are wheel adapters safe?
Yes, when installed correctly: the adapter seated flat on the hub, every nut torqued to spec, a re-torque after 50 to 100 miles, and full thread engagement on all studs.

Will my factory Tundra wheels still center properly?
Yes. The 110mm hub centric bore matches the factory wheel bore, so your wheels center on the hub lip the same way they do from the factory.