Hub Centric Wheel Adapter 6 Lug 5.5" Dodge Ram 1500 77.8mm (Pair)

These hub centric adapters are used for 6 lug 5.5" (139.7mm) bolt pattern with 77.8mm hub to fit factory wheels (77.8mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 12x1.5 thread size pre-installed wheel studs are included.

• Dodge: Ram 1500 2019-on
  
  

Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).

**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.

Fitment and specs

• 6x5.5" (139.7mm) on the hub and wheel side, Dodge Ram 1500 fitment
• 77.8mm hub bore for a centered, hub centric seat
• Same pattern in and out, so it acts as a spacer for track width
• Sold in pairs

Since the pattern is 6x5.5" (139.7mm) on both sides, these widen your Ram's track by pushing the wheels outward rather than changing the pattern. Mount each adapter flat against a clean hub, torque to your Dodge Ram 1500's factory specification with our torque reference chart, and re-torque after 50 to 100 miles. Trim any factory studs that reach past the adapter face so the wheel seats flush.

Common questions

Are wheel adapters safe?
Yes, when they sit flat on a clean hub, every stud and thread is fully engaged, and the hardware is torqued to spec and re-torqued after the first short drive.

What is the 77.8mm for?
That is the hub bore, which locates the adapter on the center of the hub for a smooth, centered ride. Free US shipping is included.