Hub Centric Wheel Adapter 6x5.5 To 5x4.75 Thickness 2" (Pair)
| Converts from (hub) | 6x5.5" (6x139.7mm) |
|---|---|
| Center bore | 108mm |
| Stud thread | 12x1.5 |
| Thickness | 2" |
| Material | 6061-T6 billet aluminum |
| Centering | Hub centric |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
This type of adapter is used for 6 lug 5.5" (139.7mm) bolt pattern truck to fit 5 lug 4.75" (120.7mm) bolt pattern wheels. CNC machined billet aluminum and 2" in thickness. New wheel studs are included. Our premium quality adapters ensure durability and strength. Price is for a pair (2 adapters).
The listed hub-side bore is 108mm. If that bore is larger than your vehicle hub, it does not provide a snug hub-centric fit. Confirm how the adapter and wheel will be centered before installation. Correct centering helps prevent vibration from an off-center fit.
What 6 lug vehicles do these adapters fit?
- Chevrolet: C/K 1500 2/4WD (99-01), Silverado 2/4WD (99-on), Sierra 2/4WD (99-on), Avalanche (01-on), Tahoe, Yukon (95-on), Blazer-Full Size 4WD (92-94), Suburban (92-on)
- GMC: K1500 4WD (88-on), GMC - Denali (98-on)
- Toyota: Tacoma 4WD (95-on), Sequoia 4WD (01-on), Tundra (99-06), 4-Runner (86-on), T100 (93-98), Landcruiser (62-92)
- Nissan: Xterra-16" (99-on), Frontier Pickup 4WD (98-04), Frontier (87-04), Hard Body Pickup 2/4WD (85-on), Pickup 2/4WD (72-84)
What 5 lug wheels do they fit?
- All 5 lug 4.75" (120.7mm) bolt pattern wheels, factory and aftermarket
Examples of applications:
- Putting 5 lug Chevy Corvette wheels on 6 lug Chevy Silverado axle
- Putting 5 lug Chevy S10 wheels on 6 lug Toyota pickup
Features:
- 2-piece conversion type
- 108mm hub-side bore; check hub and wheel centering for your vehicle and wheels
- True aircraft quality 6061 T6 billet
- CNC precision machined
- Pressed-in through hardened steel studs
You can view installation instruction document online How To Install 2 Piece Conversion Adapters
Fitment and specs
- Bolts to a 6x5.5" (139.7mm) hub so you can run 5x4.75" (120.65mm) wheels
- Changes a 6-lug hub to a 5-lug 5x4.75" pattern
- 2" thickness, adding the same track width on each side
- 108mm hub-side bore; check hub and wheel centering for your vehicle and wheels
- Sold as a pair
Rest each adapter on a clean hub and make sure the wheel sits flat once bolted on. Trim any factory studs that reach past the adapter face so the wheel seats flush. Tighten to your vehicle's factory specification with our torque reference chart, and re-torque after the first 50 to 100 miles.
Common questions
Are wheel adapters safe?
They are when seated flat against the hub with full stud and thread engagement, torqued to spec, and re-torqued after the first 50 to 100 miles. Look them over at every rotation.
What bolt pattern do my new wheels need?
They should be 5x4.75" (120.65mm) to fit the 5-lug side. Confirm that number on the wheel spec and the adapter bridges it to your hub.