Lug Bolt 14mmx1.50 Conical Seat 26mm Shank Short Head
Fitment and specs
- Thread size: 14mm x 1.50
- Seat type: conical (tapered) with a short head
- Shank length: 26mm, overall length: 42.50mm
- Hex size: 17mm
- Well suited to wheel adapter and under cap applications
- Sold individually, priced per piece
Start each bolt by hand for several full turns so the threads cannot cross, then snug the wheel down in a star pattern. Set final torque with a torque wrench using our torque reference chart and re-torque after 50 to 100 miles. The short head keeps clearance tight under caps and on adapter plates.
Common questions
Can I run these in wheels drilled for ball seat bolts?
No. Conical, ball, and mag seats are not interchangeable. These are conical seat bolts, so the wheel or adapter must have matching tapered holes for the bolt to center and hold torque.
How do I confirm the 26mm shank is the right length?
Measure the shank on the bolts you are replacing, or the thickness of what you are clamping. A shank that is too short reduces thread engagement, while one that is too long can bottom out before it clamps the wheel.