Rubber TR413 Snap-In Valve Stems
Rubber valve stem. Fit standard 0.453" diameter valve stem hole. Effective length is 1.25" and total length is 1.67"
Fitment and specs
- TR413 rubber snap-in valve stem
- Fits the standard 0.453" diameter valve stem hole
- Effective length 1.25"
- Total length 1.67"
These seat from the inside of the rim, so plan on the tire being dismounted or broken off the bead. Pull the stem through the valve hole until the retaining groove snaps fully into place, then air up and check the base with soapy water before the wheel goes back on.
Common questions
How do I know a TR413 fits my wheel?
Match two measurements: the valve hole should be the standard 0.453 inch diameter, and the stem length should be close to what you are removing. The TR413 measures 1.25 inches effective and 1.67 inches overall.
Can I replace just one stem?
Yes, a single damaged or leaking stem can be swapped on its own. Since the tire has to come off the bead either way, many drivers replace all four while the wheels are already being serviced.