Wheel Adapter Spacer 4x100 To 4x100 (Pair)
|
This type of adapter is used for 4 lug 100mm bolt pattern cars to fit 4 lug 100mm bolt pattern wheels. CNC machined billet aluminum and thickness options are 1" and 1.25. New wheel studs are included. These adapters can be used on the following cars, among others:
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters). **If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters. |
Fitment and specs
- Bolt pattern unchanged: 4x100mm in and out
- Acts as a spacer to add track width
- Retains your factory 4x100mm wheels
- Ships as a pair
- Free US shipping
With 4x100mm on both faces, this spacer pushes each wheel outward for a wider stance without altering fitment. Set it flat on a clean hub, confirm full thread engagement, and shorten any studs that protrude past the face so the wheel seats flush. Torque to your vehicle's factory specification using the torque reference chart, and re-torque after 50 to 100 miles.
Common questions
Are wheel adapters safe?
They are when installed right: flush on a clean hub, threads fully engaged, torqued to spec, and re-checked after the first short drive. Confirm the fit against the applications shown in the description above.
Will my current wheels still fit?
Yes. The pattern stays 4x100mm, so your existing 4x100mm wheels bolt straight back on, just spaced further out.