Wheel Adapter 5x120 To 5x112 (Pair)
| Converts from (hub) | 5x120mm |
|---|---|
| Converts to (wheel) | 5x112mm |
| Center bore | 74.1mm |
| Stud thread | 14x1.5 |
| Thickness | 1" |
| Material | 6061-T6 billet aluminum |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
Put Mercedes-Benz C-Class (1994-2026) Wheels On A BMW 3 Series (1994-2011)
These are used for 5x120mm bolt pattern cars to fit 5x112 bolt pattern wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included. Center bore is 74.1mm; studs thread size 14x1.5mm.
Bolts to these 5x120mm hubs (US models):
- Acura: Integra Type S (24-26), MDX (07-13, 17-20, 22-24), RL (05-12), RLX (14-20), TL (09-14), TLX (21-25)
- BMW: 1 Series (08-13), 3 Series (92-12, 17-18, not the 92-93 E30 convertible, which is 4x100), 4 Series (14-20), 5 Series (75-16), 6 Series (77-89, 04-10, 12-17), 7 Series (78-15), 8 Series (91-97), X3 (04-10), X5 (00-06)
- Cadillac: ATS-V (16-19), CT4-V Blackwing (22-25), CT5 (20-26), CT6 (16-20), CTS (08-19), CTS-V (09-19), XT4 (19-25), XTS (13-19)
- Chevrolet: Camaro (10-24), Corvette (20-22), Equinox (10-17), Impala (14-20, not the 14-16 Impala Limited), Malibu (13-15), SS (14-17)
- Honda: Civic Type R (17-21, 23-26), Odyssey (05-26), Passport (19-26), Pilot (09-26), Ridgeline (06-14, 17-26)
- Land Rover: Discovery (99-04), LR3 (05-09), Range Rover (96-02)
- Pontiac: G8 (08-09)
- Saab: 9-5 (10-11)
Hub-side lug nuts or lug bolts are bought separately, in your vehicle's thread. Where the hub uses lug bolts, confirm full thread engagement, fully recessed heads and flush seating.
Runs 5x112mm wheels, including factory wheels from these vehicles (US models):
- Audi: A3 (06-26), A4 (96-09), A5 (08-26), A6 (95-26, not the A6 e-tron), A7 (12-26), A8 (97-26), Q3 (15-26), Q5 (09-26), TT (08-23)
- Mercedes-Benz: C-Class (94-26), CLA (14-23), CLK-Class (98-09), CLS-Class (06-23), E-Class (94-26), GLA (15-22), GLC (16-22), GLK (10-15), ML-Class (98-15), S-Class (92-22), SL-Class (94-20), SLK-Class (98-16)
- Volkswagen: Beetle (12-19), Golf (10-21), Passat (98-22)
Mount the wheels on the adapter's 14x1.5 studs with lug nuts that match your wheels' seat.
**If hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs.
Fitment and specs
- Bolts to your 5x120mm hub so you can run 5x112mm wheels
- CNC machined from 6061 T6 billet aluminum
- 74.1mm center bore on the vehicle side
- New 14x1.5mm wheel studs included
- Sold as a pair with free US shipping
Clean the hub face so the adapter seats completely flat, torque it to the hub, then mount the wheel on the adapter studs and torque the lug nuts. Use the values in our torque reference chart, and re-torque all hardware after the first 50 to 100 miles.
Common questions
Are wheel adapters safe?
Yes, when installed correctly. The adapter must sit flat against the hub, every fastener torqued to spec with full thread engagement, then re-torqued after 50 to 100 miles. Problems trace back to skipped steps, not to a properly mounted adapter.
Will these change how my wheels sit?
Yes. Each wheel moves outboard by the thickness of the adapter, so account for that along with wheel offset if fender or suspension clearance is tight.
Shop related: 5x120 hub wheel adapters