Wheel Adapter 5x120 To 5x5 (Pair)
| Converts from (hub) | 5x120mm |
|---|---|
| Converts to (wheel) | 5x5" (5x127mm) |
| Center bore | 74.1mm |
| Stud thread | 12x1.5 |
| Thickness | 1" |
| Material | 6061-T6 billet aluminum |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
Put Chevrolet C/K 1500 2WD (1988-1999) Wheels On A BMW 3 Series (1994-2011)
These are used for 5x120mm bolt pattern cars to fit 5x5 inch bolt pattern wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included. Center bore is 74.1mm; studs thread size 12x1.5mm.
Bolts to these 5x120mm hubs (US models):
- Acura: Integra Type S (24-26), MDX (07-13, 17-20, 22-24), RL (05-12), RLX (14-20), TL (09-14), TLX (21-25)
- BMW: 1 Series (08-13), 3 Series (92-12, 17-18, not the 92-93 E30 convertible, which is 4x100), 4 Series (14-20), 5 Series (75-16), 6 Series (77-89, 04-10, 12-17), 7 Series (78-15), 8 Series (91-97), X3 (04-10), X5 (00-06)
- Cadillac: ATS-V (16-19), CT4-V Blackwing (22-25), CT5 (20-26), CT6 (16-20), CTS (08-19), CTS-V (09-19), XT4 (19-25), XTS (13-19)
- Chevrolet: Camaro (10-24), Corvette (20-22), Equinox (10-17), Impala (14-20, not the 14-16 Impala Limited), Malibu (13-15), SS (14-17)
- Honda: Civic Type R (17-21, 23-26), Odyssey (05-26), Passport (19-26), Pilot (09-26), Ridgeline (06-14, 17-26)
- Land Rover: Discovery (99-04), LR3 (05-09), Range Rover (96-02)
- Pontiac: G8 (08-09)
- Saab: 9-5 (10-11)
Hub-side lug nuts or lug bolts are bought separately, in your vehicle's thread. Where the hub uses lug bolts, confirm full thread engagement, fully recessed heads and flush seating.
Runs 5x5" (5x127mm) wheels, including factory wheels from these vehicles (US models):
- Chevrolet: C10 (71-87), C/K 1500 2WD (88-99), K5 Blazer 2WD (73-82)
- Dodge: Durango (11-22)
- Jeep: Grand Cherokee (99-16), Wrangler (07-23)
Mount the wheels on the adapter's 12x1.5 studs with lug nuts that match your wheels' seat.
**If hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs.
Fitment and specs
- Bolts to your 5x120mm hub so you can run 5x5 inch bolt pattern wheels
- CNC machined 6061 T6 billet aluminum
- 74.1mm center bore on the vehicle side
- New 12x1.5mm wheel studs included
- Sold as a pair with free US shipping
Torque the adapter to a clean, flat hub face first, then mount the wheel with lug nuts that match the 12x1.5mm studs and your wheel's seat. Use our torque reference chart for values and re-torque after the first 50 to 100 miles.
Common questions
Are wheel adapters safe?
Yes, when installed properly. The adapter must seat flat on the hub, all hardware torqued to spec with full thread engagement, then re-torqued after 50 to 100 miles.
Is 5x5 the same as 5x127?
Yes. 5x5 is the inch notation and 5x127 is the metric one for the same pattern, so any wheel listed as 5x127 fits the wheel side of these adapters.
Shop related: 5x120 hub wheel adapters