Wheel Adapter Studs 14x1.5 Extended For 8 Lug
Wheel adapter studs 14x1.5 thread size with 3.35" overall length (L1). Knurl diameter (D1) is 0.6".
Fitment and specs
- Thread size: 14x1.5
- Overall length (L1): 3.35 inches
- Knurl diameter (D1): 0.6 inch
- Extended length stud for 8 lug wheel adapters that run 14x1.5 studs
At 3.35 inches overall this is a long stud, so test-fit your wheel first and make sure the extra length clears the back of the wheel and any closed-end lug nuts. Press each stud in straight until the head seats flush against the back of the adapter plate. Finish by torquing the lug nuts to spec with our torque reference chart, then re-torque after 50 to 100 miles.
Common questions
How do I know this is the right stud for my 8 lug adapter?
Match the numbers on the stud you are pulling out: 14x1.5 thread, 3.35 inches overall length (L1), and a 0.6 inch knurl diameter (D1). If your old stud is shorter, order the standard length instead so you do not run into clearance problems behind the wheel.
Do longer studs change how the lug nuts torque down?
No. The torque spec comes from the thread size and seat type, not the stud length. The extra length just gives you more usable thread; you still torque to spec and re-check after the first 50 to 100 miles.