Wheel Adapter Studs 3/8"x24
Wheel adapter studs 3/8"x24 thread size with 1.8" overall length (L1). Knurl diameter (D1) is 0.5". Compatible with some of our 4 lug ATV wheel adapters that come in 3/8"x24 thread size stud.
Fitment and specs
- Thread size: 3/8"x24
- Overall length (L1): 1.8"
- Knurl diameter (D1): 0.5"
- Replacement stud for our 4 lug ATV wheel adapters built with 3/8"x24 studs
Check two numbers before ordering: the 3/8"x24 thread for your lug nuts and the 0.5" knurl diameter for the stud hole in your adapter. Press each stud in squarely until the knurled section seats fully and the head sits flush against the adapter body. Once a wheel is mounted on these studs, tighten the nuts to the spec in our torque reference chart and re-torque after 50 to 100 miles.
Common questions
Which adapters do these studs fit?
They are sized for some of our 4 lug ATV wheel adapters that use 3/8"x24 thread studs. Confirm your adapter's stud thread and knurl bore first, since a different thread size will not interchange.
How do I know the length is right?
Overall length is 1.8", measured as L1. Compare that against the stud you are replacing so the lug nut keeps the same thread engagement it had before.