Wheel Studs 14mm 1.50 RH 1.5"

Fitment and specs

• Thread size: 14mm x 1.50 (14x1.5)
• Thread direction: right hand (RH)
• Application: replacement wheel stud for hubs that use 14x1.5 RH studs

Before installing, compare the new stud side by side with the one you removed and confirm thread size, thread direction, and overall length all match your original hardware. Once the wheel is back on, tighten the lug nuts in a star pattern to your vehicle's spec using our torque reference chart. Re-check torque after 50 to 100 miles of driving, since fresh studs and freshly mounted wheels can settle slightly.

Common questions

How do I confirm these studs fit my vehicle?
Remove one of your existing studs and measure it. The thread diameter should be 14mm with a 1.50 thread pitch, and the threads should tighten clockwise (right hand). Match the overall length and knurl of your original stud as well, since a stud that sits too short reduces lug nut engagement.

Can I mix these with left hand thread studs?
No. These are right hand thread, which tightens clockwise. Left hand studs tighten counterclockwise, and the two are not interchangeable. Replace like for like on each hub so every lug nut on the wheel torques the same way.